Jual Digital Oscilloscope Hantek DSO5102B

Hantek DSO5102B 100MHz Digital Storage Oscilloscope

Features :

• 100MHz bandwidths
• 1GSa/s Real Time sample rate
• Large (7.0-inch) color display, WVGA(800×480)
• Record length up to 1M
• Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
• USB host and device connectivity, standard
• Multiple automatic measurements
• Four math functions, including FFTs standard
• Provides software for PC real-time analysis

Specification :

• Model : DSO5102B
• Bandwidth : 100MHz
• Real-time Sample Rate : 1GSa/s
• Equivalent Sample Rate : 25GSa/s
• Record Length(Sample Points) : Single-channel: Maximum 1M; Dual-channel: Maximum 512K (4K, 16K, 40K optional)
• SEC/DIV Range : 4nS/div-40S/div (in a 2, 4, 8 sequence)
• Delay Time Accuracy : 500ps

Vertical

• A/D Converter : 8-bit resolution, each channel sampled simultaneously
• VOLTS/DIV Range : 2mV/div^ 5V/div at input BNC
• Position Range : ± 50V(5V/div) , ±40V(2V/div^ 500mV/div) , 2V(200mV/div^ 50mV/div) ±400mV(20mV/div^ 2m V/div)
• Bandwidth Limit : 20MHz
• Rise Time at BNC : d3.5ns

DC Gain Accuracy

• ± 4% for Sample or Average acquisition mode, 5mV/div to 2mV/div
• ± 3% for Sample or Average acquisition mode, 5V/div to 10mV/div

Trigger
Trigger Sensitivity (Edge Trigger Type) :

• DC: CH1/ CH2(Typical) 1div from DC to 10MHz; 1.5div from 10MHz to Full
• EXT Typical 200mV from DC to 40MHz
• EXT/ 5 Typical 1V from DC to 40MHz
• AC: Attenuates signals below 10Hz
• HF Reject: Attenuates signals above 80kHz
• LF Reject: Attenuates signals below 150kHz
• Noise Reject: Reduces trigger sensitivity

Trigger Level Range

• CH1, CH2: ±8 divisions from center of screen
• EXT: ±1.2V EXT/5: ±6V

Trigger Level Accuracy, typical ( Accuracy is for signals having rise and fall times e20ns) :

• CH1, CH2: ±(0.3div× V/div) (within ±4 divisions from center of screen)
• EXT: ±(6% of setting + 40mV)
• EXT/5: ±(6% of setting + 200mV)

Holdoff Range : 100ns-10s
Trigger Type

• Edge : Trigger on the rising or falling edge
• Pulse Width : Trigger (when >,, <, =, `) on a positive or negative slope, Set Time: 20ns–10s
• Overtime : from the rising or falling edge, Set Time: 20-10s
• Alternate : Internal trigger on edge, pulse width, video or slope

Measurement
Cursors

• Manual: The difference between voltage cursors ³ V; the difference between time cursors ³ T; 1/³ T calculated by Hz.
• Tracing: The voltage and time at a waveform point

Automatic : Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width

Display

• Type : Right angle 7″ TFT 16-digit color LCD
• Resolution : 800*480 dots
• Contrast : 16 gears, with the progress bar to show adjustment
• Interface : USB host and USB slave

Power Supply
Voltage

• 100-120VACRMS(±10%) 45Hz to 440Hz CATa
• 120-240VACRMS(±10%) 45Hz to 66Hz CATa

Power : <30W
Fuse : 2A, T rating, 250V
Mechanical

• Size : Length: 313mm Width: 108mm Height: 142mm
• Weight : 2.08Kg (exclusive of packing and accessories)