Digital Storage Oscilloscope Hantek DSO5062B

Hantek DSO5062B 60MHz Digital Storage Oscilloscope

Features :

• 60MHz bandwidths
• 1GSa/s Real Time sample rate
• Large ( 7.0-inch) color display, WVGA(800×480)
• Record length up to 1M
• Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
• USB host and device connectivity, standard
• Multiple automatic measurements
• Four math functions, including FFTs standard
• Provides software for PC real-time analysis

Specification :

• Model : DSO5062B
• Bandwidth : 60MHz
• Real-time Sample Rate : 1GSa/s
• Equivalent Sample Rate : 25GSa/s
• Record Length( Sample Points) : Single-channel: Maximum 1M; Dual-channel: Maximum 512K (4K, 16K, 40K optional)
• SEC/DIV Range : 4nS/div-40S/div (in a 2, 4, 8 sequence)
• Delay Time Accuracy : 500ps

Vertical

• A/D Converter : 8-bit resolution, each channel sampled simultaneously
• VOLTS/DIV Range : 2mVdiv^ 5V/div at input BNC
• Position Range : ±50V(5V/div) , ±40V(2V/div^ 500mV/div) , 2V(200mV/div^ 50mV/div) ±400mV(20mV/div^ 2m V/div)
• Bandwidth Limit : 20MHz
• Rise Time at BNC : d5.8ns

DC Gain Accuracy

• ± 4% for Sample or Average acquisition mode, 5mV/div to 2mV/div
• ± 3% for Sample or Average acquisition mode, 5V/div to 10mV/div

Trigger
Trigger Sensitivity (Edge Trigger Type) :

• DC: CH1/CH2(Typical) 1div from DC to 10MHz; 1.5div from 10MHz to Full
• EXT Typical 200mV from DC to 40MHz
• EXT/ 5 Typical 1V from DC to 40MHz
• AC: Attenuates signals below 10Hz
• HF Reject: Attenuates signals above 80kHz
• LF Reject: Attenuates signals below 150kHz
• Noise Reject: Reduces trigger sensitivity

Trigger Level Range

• CH1, CH2: ± 8 divisions from center of screen
• EXT: ± 1.2V EXT/ 5: ± 6V

Trigger Level Accuracy, typical (Accuracy is for signals having rise and fall times e20ns) :

• CH1, CH2: ± (0.3div× V/div) (within ± 4 divisions from center of screen)
• EXT: ± (6% of setting + 40mV)
• EXT/ 5: ± (6% of setting + 200mV)

Hold off Range : 100ns-10s
Trigger Type

• Edge : Trigger on the rising or falling edge
• Pulse Width : Trigger (when >,, <, =, `) on a positive or negative slope, Set Time: 20ns–10s
• Overtime : from the rising or falling edge, Set Time: 20-10s
• Alternate : Internal trigger on edge, pulse width, video or slope

Measurement
Cursors

• Manual: The difference between voltage cursors ³ V; the difference between time cursors ³ T; 1/³ T calculated by Hz.
• Tracing: The voltage and time at a waveform point

Automatic : Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width
Display

• Type : Right angle 7″ TFT 16-digit color LCD
• Resolution : 800*480 dots
• Contrast : 16 gears, with the progress bar to show adjustment
• Interface : USB host and USB slave

Power Supply
Voltage

• 100-120VACRMS(±10%) 45Hz to 440Hz CATa
• 120-240VACRMS(±10%) 45Hz to 66Hz CATa

Power : < 30W
Fuse : 2A, T rating, 250V
Mechanical

• Size : Length: 313mm Width: 108mm Height: 142mm
• Weight : 2.08Kg (exclusive of packing and accessories)