About Me

header ads

Protek 3120 200MHz Digital Storage Oscilloscope

Protek 3120 200MHz, Digital Storage Oscilloscope

Features
  • 200MHz Bandwidth with 2 Channels
  • 1GSa Real-time Sampling Rate
  • 25GSa/s Equivalent-Time Sampling Rate
  • Large 7-inch Color Display
  • Record Length up to FFT
  • Multi-Languages Support
  • USB Host and Device Connections

Specifications :
Vertical Specifications
  • Channels : 2
  • Bandwidth : 200MHz
  • Rise Time : 1.7ns (Approx.)
  • Input Impedance : Resistance: 1M + – 2%
  • Capacitance: (20+/-5) pF
  • Polarity : Normal & Invert
  • Maximum Input : 400V (DC + AC Peak)
  • Waveform Signal Process : CH1 +/- CH2, CH1 x CH2, CH1/CH2, FFT
  • Bandwidth Limit : 20MHz +/-% Typical
Horizontal Specifications
  • Sampling Rate : 1GSa/s; Equivalent Max. Sampling Rate is 25GSa/S for all Times
  • Range (1-2-5 Increments) : 50s/div ~ 1ns/div
  • Mode : Main Sweep, Main Sweep + Delay Expansion Sweep, X-Y
Trigger Specifications
  • Source : CH1, CH2, EXT., EXT/5, AC Line
  • Mode : Auto, Normal, Single
Trigger Sensitivity
  • DC: CH1/2 (typical) 1 Div from DC to 10MHz; 1.5div from 10MHz to full
  • EXT (Typical) : 200mV from DC to 40MHz
  • EXT/5 (Typical) : 1V from FC to 40MHz
  • AC: Attenuates signal below 10Hz
  • HF Reject: Attenuates signals below 15kHz
  • LF Reject: Attenuates signals below 150 kHz
  • Noise Reject: Reduces trigger sensitivity
Trigger Level Range
  • CH1, CH2: +/- Division from center of screen
  • EXT: +/- 1.2V
  • EXT/ 5: +/- 6V
Trigger Level Accuracy (Accuracy is for signals having rise and fall time at max 20ns)
  • CH1, CH2: +/-( 0.3div x V/ div) ( within + / -4 Division from center of screen)
  • EXT: +/- ( 6% of Setting + 40mV)
  • EXT/ 5: +/- (6% of setting + 200mV)
Edge Trigger : Rising, Falling, Rising & Falling
Pulse Width Trigger : Trigger (when > , , 2; Delay 1- > 2
Cursor Measurement
  • Voltage Difference between cursors V
  • Time Difference between Cursors T
  • Frequency difference between Cursors 1 T
Display
  • TFT LCD Type : 7.0 Inch Diagonal Crystal Display
  • Display Resolution : 800 x 480 Dots
General Specifications
  • USB : USB Host/USB Device
  • Power Source : AC 100V ~ 240V +/- 10% , 45Hz ~ 440Hz, Auto Selection
  • Physical Dimensions : 12.3 x 4.25 x 5.6 ” inches (313 x 108 x 142mm)
  • Weight : 4.6lbs (2.08Kg)

Post a Comment

0 Comments